MP206 is a 1/2 prepolarized free-field condenser microphone. It is specially developed for the need of low cost general
purposes noise measurements and recordings. All microphones are tested for long- term stability and reliability.
The MP206 has unique design features to ensure the quality. Specially designed protection grids reduce the directivity
factors in high frequencies. The microphone diaphragm is made from polymer with housing made copper.
The frequency response extended to 10 kHz.
Due to the material selections, the MP206 is suitable for indoor and controlled environmental uses.
The temperature and pressure coefficients are not complied with the Class 2.
Specifications
| Diameter |
1/2 inch |
| Response |
Free Field |
| Open-Circuit Sensitivity (250 Hz) |
30 mV/Pa |
| Frequency Response |
20 - 10 kHz [1] |
| Polarization Voltage |
0 V |
| Dynamic Range (3% Distortion Limit) |
> 135 dB |
| Cartridge Thermal Noise |
< 23 dB (A) |
| Capacitance (Typical) |
17.0 pF |
| Pressure Equalization Vent |
Rear Vented |
| Operating Temperature |
0 to 40°C |
| Operating Humidity |
0 to 98% RH |
| Equivalent Air Volume |
240 mm3 at 250 Hz |
| Temperature Coefficient (-10 to 50°C) |
- 0.05 dB/°C |
| Ambient Pressure Coefficient (250 Hz) |
-0.05 dB/kPa |
| Dimensions |
IEC 1094-4 Type WS 2 |
|
I